Monday, August 31, 2009

more sketches










Friday, August 28, 2009

customable brand-less guitar


Ripped open this guitar, it's funny to see how a cheap guitar is made, I've been lucky enough so far to only deal with good stuff. The body is made of plywood, it should be OK with the crackle mod, it's even good that it's so light because there will be a lot of new embedded gear...

Wednesday, August 26, 2009

more sketches










Tuesday, August 25, 2009

Customable brand-less guitar













I got myself this cheap vintage brand-less strat copy, probably an early 70s Japanese guitar, a Crestline or something. I'm still making research, if you have any information about it (I've been told that this kind of guitars have been quite common at some point), you are welcome to leave a comment.

I'll wait until I know more about it, but I'll probably use it as a base to the crackle guitar project, I like the idea of using a vintage guitar to do an experimental custom.
I'll keep the trem and the pickups but most likely change the other gears. The crackle plate will cover most of the body and the electronics will be deeply modified.

Saturday, August 22, 2009

more sketches










Tuesday, August 18, 2009

sketch

guitar

Another model that starts to look like something... For a while now I've been busy with the lower horn - that should be curved enough to allow playing sitting with a high neck (this position usual in classical guitar is now more en more used by electric players, under the influence of some metalheads) but breaks the line if it stays in backward position. I've tried a double horn before, this is another proposal.
I like the 'penguin' finish - white body and black pickguard and gears -, like my Rickenbacker 620 white.

Saturday, August 15, 2009

more sketches










Friday, August 14, 2009

work in progress


As I started cutting the pickup cavity, I decided to get another pickup and left the thing unfinished. I then ordered a dual-rail single humbucker that has the big advantage to be splitable (it's a 6-string one but in the neck position it should fit a 7-string). The aluminium plate will hide the wrong cut once it's properly modified...
Also the model that I made out of cardboard was thin and didn't reveal that the back of the lower horn is somehow a little bit bothering to access the high notes, so I will modify it too... But I don't shred so it's not a big issue - this part of the neck I use mostly with a bottleneck.

Tuesday, August 11, 2009

work in progress

Sunday, August 9, 2009

7-string headstock


Today, I've been working on the aluminium plated headstock of my 7-string project. Since I modified the Ibanez copy design of the headstock by making it narrower, I decided to reinforce and rigidify it with aluminium - like the front of the guitar. I was not sure about the all thing and really not about the black tuners on the alu plate but I do like the result. Will make the trussrod cover out of alu too, and will glue the alu plate on the wood, but I don't know what kind of glue I should use.
Also started to file the body in shape but I should cut soon the neck socket - it's the main challenge, if I make a mistake I can throw what I did so far and start again from zero. But I've been reading some good things about glued birchwood for guitars that make me thing that I made the right choice.

Thursday, August 6, 2009

new Kawai Aquarius blog











I just started a side blog about the Kawai Aquarius - that is not only my first guitar but a very honorable and underrated one, about which it is quite difficult to find any information since Kawai stopped guitar production in the late 80s.

I managed to put on this blog scans of old Kawai catalogues of the late 70s / early 80s - I think that they were not accessible online before and hope that this will be useful for someone.

So you are welcome to visit this blog of course, but also to contribute if you've been or are a Kawai Aquarius owner or player and have pictures, stories, recordings, videos, etc. that you can share with the web.

Wednesday, August 5, 2009

more sketches










gUitarREN's facebook

gUitarREN on Facebook